Roofing Products - Ashland Latex Bonding Adhesive
Lottes Roofing
1853C Sherman Dr.
St. Charles, MO 63303
www.lottesroofing.com
"More than 30 years of experience in single ply flat roofing products"
Orders Containing Multiple Items May Qualify for Reduced Shipping
Call us at: 1-888-895-4465 or Email at: info@lottesroofing.com
Most Orders Ship from Our Distribution Center in O'Fallon, Missouri.
We work with over 100 distribution centers in 27 states. We will work with you to give you the best deal on your EPDM, TPO, Modifed Bitumen, Roof Coatings, Insulation, and Roofing Accessories!!!
Our Technicians can design and determine what you need for your roofing project and give you a complete estimate for your materials as well as instruct you about your installation process!
Roofing Installation Videos
Ashland Latex Roofing Bonding Adhesive:
This is a full pallet lot of 45 - 5 gal pails of pourable, liquid Latex Bonding Adhesive at 1,800 lbs, Class C-60, UN1133. This is enough professional grade adhesive to cover 15,000 square feet of roof membrane and insulation and or decking. It is necessary to use this professional grade adhesive to secure your roof membrane properly to the substrate.
MSDS Sheets, Technical Data Sheets, and Specification Data Sheets Available
INSTALLATION OF EPDM OR TPO USING LATEX BONDING ADHESIVE
The EPDM or TPO membrane may be installed in a fully adhered application directly over 1/2" or larger plywood decking, APPROVED DECKING OR APPROVED INSULATION, if the deck support is considered adequate for the roof load as determined by the local installer, and the roof installation meets local building codes.
Position the EPDM or TPO membrane over the substrate, wood decking, concrete, or insulation, without stretching the sheet. Allow sufficient materials for perimeter attachment. When the new membrane is to be sealed to an abutting membrane, overlap the edge of the new membrane 5” onto the "in place" membrane.
Bond the new sheet to the substrate by folding the sheet lengthwise on to itself so that one half of the underside is exposed. Smooth out all the wrinkles and buckles along the folded edge. Apply the bonding adhesive evenly at the rate of 70 -100 sq. ft. per gallon per receiving surface using a 9" plastic core paint core paint roller or application trowell with 1/8" x 1/8" groove indents. Apply the roofing membrane onto the wet adhesive while still wet to insure "transfer" of adhesive to underside or roofing membrane. Roll or lay the membrane onto the substrate taking care to avoid wrinkling. Bond the adhered half of the membrane with a 18" to 24" heavy duty push broom using a pushing motion to achieve maximum contact. Pull back the unbonded half of the sheet and repeat this procedure. Do not apply adhesive to the top surface of any abutting membrane that is to be used as the seam joint.
| Summary of Lottes Roofing Store Policies | | Payment | All Credit Cards, Company Certified Checks, Bank Checks, Money Orders, Bank Wire, Paypal | | Fees | No sales taxes except in applicable states | | Shipping | US and International | | Delivery | 24-48 hours to SHIP most in stock items, not counting weekends or holidays. Time tables will vary depending on the items ordered. | | Refunds & Returns | Returns accepted on qualified items with RGA return number | | Contact Us | | |