Roofing Materials & Accessories - Universal Rubber Pipe Boot (1 Case)
Lottes Roofing
1853C Sherman Dr.
St. Charles, MO 63303
www.lottesroofing.com
"More than 30 years of experience in single ply flat roofing products"
Orders Containing Multiple Items May Qualify for Reduced Shipping
Call us at: 1-888-895-4465 or Email at: info@lottesroofing.com
Most Orders Ship from Our Distribution Center in O'Fallon, Missouri.
We work with over 100 distribution centers in 27 states. We will work with you to give you the best deal on your EPDM, TPO, Modifed Bitumen, Roof Coatings, Insulation, and Roofing Accessories!!!
Our Technicians can design and determine what you need for your roofing project and give you a complete estimate for your materials as well as instruct you about your installation process!
Roofing Installation Videos
1" to 6" Universal Black Rubber Pipe Boot:
Universal pipe boot with stainless steel clamp ring and laminated butyl seaming tape on bottom side of pipe boot flap.
Application
Contact surfaces for the PIPE BOOT TAPE shall be cleaned to remove construction dirt using a light application of unleaded gas on a clean, lint-free rag. After cleaning apply Anjon primer to surfaces before applying seam tape.
Molded pipe boots offer a simple and reliable means to seal small pipes such as sewer vents and electrical service entry conduit. Two sizes are available: a small boot for 1/2”, 1”, 2”, and 3” pipes and a larger boot for 4”, 5”, and 6” pipes.
Seam Tape is pre-applied to the bottom flange of the boots which extends 3” onto the roof. Molded ridges mark each pipe size for cutting: always cut above the ridges! A stainless-steel hose clamp is provided, but a tube of Silicone Caulk for EPDM is required for installation.

STEP 1: Cut just above the molded ridge
corresponding to the desired pipe size

STEP 2: Clean the rubber roof
surface surrounding the pipe boot

STEP 3: Lower the pipe boot over the
pipe with the release paper in place

STEP 4: Slowly pull the release
paper to expose the seam tape

STEP 5: Roll firmly with a steel
roller to bond the boot to the roof sheet

STEP 6: After cleaning around
the boot flange, caulk the edge

STEP 7: After cleaning the top of the
boot, caulk between the boot and pipe

STEP 8: Screw the hose clamp
around the top of the pipe boot
| Summary of Lottes Roofing Store Policies |
| Payment |
All Credit Cards, Company Certified Checks, Bank Checks, Money Orders, Bank Wire, Paypal |
| Fees |
No sales taxes except in applicable states |
| Shipping |
US and International |
| Delivery |
24-48 hours to SHIP most in stock items, not counting weekends or holidays. Time tables will vary depending on the items ordered. |
| Refunds & Returns |
Returns accepted on qualified items with RGA return number |
| Contact Us |
|
|