1 Roll - 6" x 50' EPDM Rubber Roofing FLASHING TAPE

• Rubber Roofing Flashing Tape
• Used to Seal Flash Around Roof Top Detail Projections & Overlapping Pieces
• Professional Seaming Materials - Watertight Roof Seal
• Additional Freight Charges Apply - Call to Combine Shipping: 1-888-895-4465 

Lottes Roofing
1853C Sherman Dr.
St. Charles, MO 63303
www.lottesroofing.com
"More than 30 years of experience in single ply flat roofing products"

Orders Containing Multiple Items May Qualify for Reduced Shipping
Call us at: 1-888-895-4465 or Email at: info@lottesroofing.com

Most Orders Ship from Our Distribution Center in O'Fallon, Missouri. 

We work with over 100 distribution centers in 27 states. We will work with you to give you the best deal on your EPDM, TPO, Modifed Bitumen, Roof Coatings, Insulation, and Roofing Accessories!!!

Our Technicians can design and determine what you need for your roofing project and give you a complete estimate for your materials as well as instruct you about your installation process!

Roofing Installation Videos 

Professional EPDM Flashing Tape:

Vulcanized butyl flashing tape used to seal flash around roof top detail projections overlapping pieces of EPDM deck sheet roofing to form a watertight seal. Lottes Roofing primer activator is necessary to prime the seam area before applying the 6" flashing tape.


SELF VULCANIZING FLASHING JOINTS
All FLASHING DETAIL should be sealed using 5", 6" OR 12" SELF VULCANIZING FLASHING TAPE. All joints should be shingled to shed water toward the drains, scuppers, etc.

Contact surfaces for the FLASHING TAPE should be cleaned to remove construction dirt using a light application of unleaded gas on a clean, lint-free rag. After cleaning apply Lottes Roofing primer to surfaces before applying seam tape.

The FLASHING TAPE should be securely bonded to the deck sheet along the previously marked bottom sheet. The flashing shall be formed from side to side to insure a minimum of 2" overlap of the flashing beyond any edge piece. The release paper should be carefully removed without disturbing the placement of the flashing or deck sheet.

The lap joint should be "walked in" to fix placement and thoroughly rolled with a 2" metal roller in the direction perpendicular to the length of the joint.